Fociey 4K Solar Security Cameras Wireless Outdoor with Local Storage Base

About this item 360° Auto-Tracking + Cross-Camera Follow The camera spins 360° to follow motion by itself. With multiple cameras, tracking moves smoothly from one to another. See four live views on one screen and control everything from the Koocam App
No Monthly Fees – Secure Local Storage All motion clips are encrypted and saved to the included base station. It has 32GB built in, which holds up to 2 months of recordings. Your data stays safe even if someone damages the camera. Expandable to 128GB. No monthly fees
8MP Ultra HD Live View – Motion-Triggered Recording The live view is stunning 8MP clarity. Tap to zoom in and see close-up details even from far away. The camera records only when motion is detected – no wasted storage or endless footage
Get far fewer false alarms. Smart detection ignores wind, shadows, and small animals, so you only get alerts for real activity – no more annoying notifications
Full Panoramic View & Stable Connection Pan, tilt, and rotate to get rid of blind spots. Set specific zones to watch. The camera connects to your dual-band Wi-Fi (2.4G/5G) through the base station – just plug the base into your router for a stable connection
Solar Powered – Continuous Operation Rain or Shine The detachable solar panel keeps the battery running with just 3 hours of sunlight a day. Even cloudy days work fine. The updated charging circuit wastes less energy
Quick & Easy Setup – Pre-Paired Out of the Box Cameras come pre-paired with the base station. Use the Koocam App to connect the base to your phone, then plug the base into your router using the included Ethernet cable. Mount each camera where you need it – front door, back door, garage, or courtyard – with the included hardware
Tips-How to Pair Your Local Storage Base with Your Phone. Plug in the base with supplied adapter (LED turns red), connect it to your router's LAN port via Ethernet cable (keep at least 5 ft apart), and wait 1 minute for LED to turn solid blue. Then press and hold SYNC button for 5 seconds until you hear a beep and LED starts blinking blue — this puts the base into pairing mode. On your phone (with internet access), open Koocam app, tap '+' icon, and scan QR code on bottom label. If scanning fails, tap 'SN' button to enter serial number from same label. Follow app prompts; when you see 'Connected successfully,' your base is online and ready
›